Peelaway Marine (10kg) - Anti-Foul Paint Remover for Boats, Patented Water Based Poultice System, Paint Stripper Tool for Wood, Steel, Concrete & GRP

Safety

Wear coveralls, chemical resistant gloves, face mask and eye protection. If in doubt, show this label or product to your PPE supplier or call us for further advice. Ensure adequate cross ventilation if indoors. Keep product away from children and animals. Store product in a cool dry area and always replace the lid after use. In case of spillage, wash the affected area with plenty of water. See health safety and environmental information box below for full regulatory warnings.

Coverage

Coverage will vary from project to project. Determining factors will include:

• the number of layers to be stripped
• the type and age of anti-foul to be stripped

The test patch referred to above is vital to determine coverage for each particular application, but as a rough guide 1 kg will cover 2–4 m².

Removal

Slide scraper into paste and paint, keeping the paint, paste and cover together as much as possible. Take care not to gouge or scratch the gel coat. Certain paints can be softened but not easily removed with the scraper, in which case try rubbing with a scouring pad with water or mineral spirits until the original surface is revealed and wash down with water. Steam cleaning or pressure washing may also aid removal of residues.

Alternatively any remaining residue pre-softened can be removed in a few hours with a further application of Peelaway Marine. Once all the old anti-fouling paint has been removed, any remaining residues of Peelaway Marine must be cleaned or washed away. Allow the cleaned surface to dry thoroughly before re-coating.

Disposal

Collect all residues and dispose according to local regulations for this type of waste.